| Min. Order: | 10 Piece/Pieces |
|---|---|
| Trade Term: | FOB,CFR,EXW |
| Payment Terms: | Paypal, T/T, WU |
| Place of Origin: | Zhejiang, China (Mainland) |
| Means of Transport: | Ocean, Air |
| Production Capacity: | 50000 |
| Packing: | PP+Carton | Delivery Date: | 10 work days |
|---|---|---|---|
| Brand Name: | Smartsolu | Series: | GT Series |
| Model: | GT-25 | Size: | 1/4 |
| pneumatic component: | Pneumatic Vibrator | Type:: | Gear Type |
We have the following types:
K series: Pneumatic ball vibrator
GT series: Pneumatic turbine vibrator
R series: Pneumatic roller vibrator
SK series: Impact air hammer
FP Series:piston vibrator
NTP Series:Piston reciprocating impact vibrators
BVP series: Continuous pneumatic piston reciprocating percussion hammer
1)Turbine type pneumatic vibrator
2)No lubrication only clean air is required
3)Low noise 60~75dBA
Feature:
1)Turbine type pneumatic vibrator
2)No lubrication only clean air is required
3)Low noise 60~75dBA
4)Compact size
Description:
A high speed range and eccentric working moments are combined in these Vibrators to produce a powerful vibration. The body is made from an extruded stove enamelled aluminium section and the hard coated
End plates enables the vibrator to be used in the food and pharmaceutical industries. The GT-turbine vibrators comply to current international noise regulations under factory test contitions.
Design:
The vibration is produced by the centrifugalforce of the postive and negative unbalance moments in the rotor, the rotor is supported on two heavey duty, prelubricated, matched shielded ball bearings, A special
Long life grease ensures a long working life. The inner and outer raceways of the bearings are designed so that the bearings can be easily replace using only a pin-wrench. The end plates are fitted with right-andleft-hand threads and self-locking.
| Technical Parameters | |||||||||
| Type | Frequency(V.P.M) | Vibration Power(N) | Air consumption(/min) | ||||||
| 0.2Mpa | 0.4Mpa | 0.6Mpa | 0.2Mpa | 0.4Mpa | 0.6Mpa | 0.2Mpa | 0.4Mpa | 0.6Mpa | |
| GT-10 | 27.500 | 35.000 | 37.500 | 0.840 | 1.390 | 2.400 | 46 | 80 | 112 |
| GT-13 | 26.000 | 30.000 | 33.000 | 1.400 | 2.440 | 3.730 | 120 | 200 | 290 |
| GT-16 | 17.000 | 21.500 | 24.000 | 1.220 | 2.090 | 3.160 | 120 | 200 | 290 |
| GT-20 | 17.000 | 20.000 | 23.000 | 2.170 | 4.040 | 5.520 | 185 | 325 | 455 |
| GT-25 | 12.000 | 15.500 | 17.000 | 2.120 | 3.510 | 5.070 | 185 | 325 | 455 |
| GT-32 | 13.000 | 14.000 | 16.000 | 3.380 | 5.430 | 7.540 | 330 | 530 | 745 |
| GT-36 | 7.800 | 10.000 | 13.000 | 3.300 | 5.000 | 7.150 | 330 | 530 | 745 |
| GT-40 | 7.500 | 8.800 | 9.500 | 4.350 | 7.350 | 9.850 | 408 | 428 | 680 |
| GT-48 | 5.800 | 7.500 | 9.700 | 4.950 | 7.750 | 10.6007 | 408 | 428 | 680 |
| GT-60 | 4.758 | 6.530 | 8.515 | 5.700 | 9.800 | 11.150 | 505 | 600 | 920 |
Company frofile
Our company is specialized in manufactuing all kinds of valves,hydro-pneumatic components,alumium parts and plastic parts.Our main products are including pneumatic cylinder,solenoid valve,air filter,air regulator,air lubricator,pneumatic fitting,hydraulic fitting,tubes etc.as below;
*ISO Standard Cylinder:DNC/SI(ISO6431&6432)
*Standard Cylinder:SC/SU,
*Mini Cylinder:MAL,MA,,MI,CJ2B,CDM2B
*Compact Cylinder:SDA,CQ2
*Cylinder:CU,TN,STM,MGP
*Solenoid Valve:3v1,3v,4v,4M,3A,4A ,drain valve etc
*Air Source Treatment Unit:A,HA,HNA,T,A/B,etc
*pneumatic accessories:fitting,hand valve,muffler,tube,pressure switch
*Pneumatic Vibrator:GT,K,R,SK,FP,NTP etc.
Category: Pneumatic Vibrators